FP600 Drone Maintenance

Drone Maintenance   1. Use a water gun to clean the front and rear covers, drone body, motors, propellers, and ESC covers to remove any residual pesticide. Then wipe them dry with a cloth.   2. Carefully check the fastening screws on the drone, motors, ESCs, and propellers. Tighten any loose screws and replace any stripped screws.   3. Replace damaged propellers and worn-out propeller clip gaskets promptly.   4. For the FP400's buckles, replace them if they are loose or deformed. 5. Manually rotate the motors. If there is any abnormal noise or difficulty in rotation, please visit the service center for inspection and repair. 6. Check the battery brackets, wheels, and silicone gaskets. Replace any damaged or missing parts promptly.   7. For...

Avionics System Maintenance   1. Use alcohol wipes to clean the dirt from the connectors of the main control, power distribution board, radar, FPV, ESC, and other modules. Allow them to dry before reconnecting.   2. Inspect the wiring harnesses of the electrical modules for damage. Ensure that the RTK and receiver feeder harnesses are not bent or broken.     3. Use alcohol wipes to clean the electrode copper sheet interfaces of the power distribution board to remove copper rust and black arc marks. If the copper sheet is noticeably burnt or split, replace it promptly.   4. Check if the screws securing the power distribution board and avionics modules are loose. Tighten any loose screws and replace any stripped screws.