Topxgun Drone Maintenance

Drone Maintenance   1. Use a water gun to clean the front and rear covers, drone body, motors, propellers, and ESC covers to remove any residual pesticide. Then wipe them dry with a cloth.   2. Carefully check the fastening screws on the drone, motors, ESCs, and propellers. Tighten any loose screws and replace any stripped screws.   3. Replace damaged propellers and worn-out propeller clip gaskets promptly.   4. For the FP400's buckles, replace them if they are loose or deformed. 5. Manually rotate the motors. If there is any abnormal noise or difficulty in rotation, please visit the service center for inspection and repair. 6. Check the battery brackets, wheels, and silicone gaskets. Replace any damaged or missing parts promptly.   7. For...

TOPXGUN AGRI ACADEMY   In this tutorial, we will learn some instructions on switching spreading mode and drone spraying mode.   When switching spraying and spreading mode, some clients remove the sealing ring for the convenience of connecting the adapter cable, which may cause a short-circuit situation, actually the sealing ring has a waterproof role. If the connection is not smooth, you can apply a small amount of grease. After replacing the broadcast, the connecting wires of the front and rear centrifugal spray nozzles should be docked to prevent dust from entering when broadcasting, resulting in malfunctioning of the interface after switching sprays.   When flushing the aircraft, spraying or broadcasting near the HUB board, be sure that the interface...